soda ash treats acidic well water

When to Use Soda Ash Systems to Treat Acidic Well Water

This treatment framework system is utilized if water is acidic (low pH). Soda ash, the sodium carbonate or sodium, hydroxide increase the pH of the water. To grow toward fairness when embedded into a water system. Not at all like neutralizing filters. They don’t wreck hardness in treated water. Infusion methods are a state-of-passage structure.

The soda ash system, that we use in drinking water is the customary unadulterated sodium carbonate. You can get made soda ash, yet in my arrangement is most soda ash debris that is utilized comes from the mineral called “trona,” which is a characteristic sodium carbonate mineral. For drinking water, you need to get to know that is guaranteed by NSF or made like a to drinking water.

Acidic well water has to with the level of PH, and pH is a scale of acidic or alkaline water from zero to 14. Seven being right in the middle, that’s considered neutral. Anything below neutral is on the acidic side of the pH scale, and acidic water can be quite corrosive. Anything above seven on the pH scale is considered alkaline, and quite frankly, there’s a lot of health folks out there talking about how high pH water’s better for you. Taking care of the water that’s on the acidic side and need to back towards neutral.
Water becomes acidic because in the hydrologic cycle when water evaporates and condenses in the sky to create clouds, those clouds become full of moisture. It precipitates back to earth either as rain or snow. In that precipitation process, water combines with carbon dioxide and creates carbonic acid, so rain is slightly acid. And depending upon the earth that it goes down through into our groundwater, it can become either higher in pH because it passes through alkaline-rich Rock in the soil, or it can become more acidic due to the lack of those kinds of minerals being in the soil.

Well, when that happens, we need to do something to adjust that pH, adjust that acid water backup towards neutral. The reason that to do because acidic water can be very corrosive.

If you have acidic water, you want to treat the whole house because that acid water is destroying all your plumbing. If you are seeing blue or greeny stains on your drains, that’s what you got going on. You’ve got acidic water that’s actually eroding the copper from the inside of your plumbing. And if that’s left unaddressed, what happens next you’ll get pinhole leaks. Those pinhole leaks are going to be behind a wall someplace and you’re going to have lots of damage to repair.

So acidic water is something not to be toyed around with. You definitely want to make sure that you take care of it. It can also destroy your water heater or any of your hot water-using appliances. The hotter the water is, actually the more corrosive than water becomes.

The Solution to Treat Acidic Well Water

There is a number of ways that we attack acidic water. The most common is using a material called Calcite, and flow water through that calcite to raise pH. Calcite is a mineral that’s very high in alkalinity. In fact, it’s made a lot of calcium, and calcium is very rich in alkalinity. And bypassing water is like a universal solvent. And as water touches stuff, it dissolves it and it carries it away and it becomes part of that water molecule.

Leave a Reply

Your email address will not be published. Required fields are marked *